Collection: Pressing Instructions

Our screen print transfers, DTF prints and RTS prints are best used with a heat press.  We do not recommend using a Cricut Heat Press or a Home Iron.  Cricut Heat Press and Iron will deliver the heat, it cannot do the pressure needed to ensure the long life of the print itself.  No Teflon Sheets or covers are needed.

For Full color Screen Print Transfers, press at 320F for 12-15 Seconds

For Single Color Transfers, press at 325F for 10 Seconds, Heavy Press, Hot Peel

For DTF Transfers, press 300-320F for 10-15 Seconds, Hot Peel

Rhinestone Transfers, press 325-350 for 15-20 Seconds, Medium Press, Cold Peel

Patches, press 325-350 for 15-20 Seconds, Turn inside out and press 15 Seconds Longer

Pre-press your garment for at least 5 seconds to remove any moisture.  

Lay your Transfer with the side down on your garment.  Press.  Peel back the sheet immediately, while hot (DTF prints should be rubbed with some pressure before peeling off).  Go slow and start at a corner to see if ink has been fully released from the sheet.